contsales

sales@gulfcoastelevator.com

PNEUMATIC ELEVATOR

DRUM ELEVATOR

OUTDOOR ELEVATOR

Gulf Coast Elevator Company an authorized dealer for Precision Lift Industries, LLC. Precision Lift Industries was founded by elevator contractors who set out to build a better residential elevator, starting from the initial design and engineering, followed by installation and testing. The 7500 winding drum series is the result of thousands of hours of research and development. This residential elevator is the only
Precision Lift Industries, LLC was founded by elevator contractors who set out to build a better residential elevator, starting from the initial design and engineering, followed by installation and testing. The 7500 winding drum series is the result of thousands of hours of research and development. This residential elevator is the only elevator specifically designed for homes located in coastal areas! Here are some advantages that we have over other manufacturers:

Superior performance using the latest technology in microprocessor controls, VVVF drives, integrated gear motors and CNC metal cutting/forming
Faster Installation
Reliability
Corrosion resistant components
Aluminum components for a lighter elevator
Full tech support
Higher travel distance
Safest winding drum system available
Shop drawings / sales presentation drawings always available in 24-48 hours
On-site installation assistance

AUTHORIZED TEXAS DEALER

Call or email anytime for more information or with questions.
10022 Kingspoint
Houston, TX 77075
713-943-9988 Fax 713-941-6978
Email: sales@gulfcoastelevator.com

High Performance Winding Drum Elevators

A precision helical beveled gear-motor assembly is mounted at the top of the guide rails. This assembly raises and lowers the elevator via two 3/8” galvanized aircraft quality steel cables. The motor is controlled using a Variable Voltage/Variable Frequency Electronic Drive System that ensures excellent ride quality. Winding drum elevators do not require a machine room. The WD 7500 is the only residential elevator specifically designed for coastal installations!

Shaker Style Cab Mahogany Cab Birch Veneer Cab Cherry Veneer Cab

Standard features include:

Travel speed of 40 fpm
Standard size cab: 3 ft (w) x 4 ft (d)
Cab height 6 ft, 8 in.
Electric door interlocks
Clear accordion gate
Magnetic landing system
Aluminum platform and rail brackets
Corrosion resistant selector tape
All safety features require by ASME A17.1 Section 5 (National Elevator Code)
Recessed lighting (automatic)
Stainless steel fixtures
Polished aluminum handrail
Automatic homing (after programmed amount of time, elevator will automatically go to the designated floor)
Standard capacity of 750 lbs
Travel distance up to 40 ft
Finished flooring allowance of ¼ inch
Safety factor of 9

Optional features include:

Custom built cabs using real hardwoods, granite, raised or recessed trim, stainless steel or antique bronze fixtures
Window openings, glass cabs
Cab height of 8 ft
Emergency battery lowering device and surge protectors
Position indicators
Automatic gate operators
Finished flooring allowance of ¾ inch plus
Mounted silver or gold operating instructions – great for rental properties
Custom platform sizes
Higher Speeds (when permitted by local code)

Powder Coating Process: Our powder coating process passes the AAMA-2605 4,000 hour salt spray certification from the American Architectural Manufacturers Association, which is the highest rating achievable. A primer is applied to both aluminum and carbon steel work before the top coat is applied.


Precision Lift's exclusive MONO-FAB design.             High Performance Cyclo Gearbox


Standard Stainless Steel Fixtures (above)

Components

The Pneumatic Vacuum Elevator consists of three main parts:

EXTERIOR CYLINDER: The cylinder is a transparent self-supporting tube, built around a specially designed aluminum structure. The tube walls are made of curved polycarbonate sheets. The tube consists of modular sections, which easily can fit into one another. The roof of the tube, made of steel, ensures air tight closures with suction valves and inlets.

ELEVATOR CAR: The car runs inside the cylinder on rails/columns, which are part of the same self supporting structure of the cylinder. The walls of the car are made of transparent polycarbonate panels. The car is also equipped with an anchoring system that activates on reaching the indicated floor, provides precise but smooth stops, and locks the car mechanically.

SUCTION ASSEMBLY: or “Head Unit” is on the top of the tube/cylinder, where the turbines, the valves, and the controls are located. The control cabinet is a metal box housing with a PVE controller board and other electric devices. The head unit is built and placed on either the same tube that holds the car (standard), or separately (split unit) at distances of up to 30 linear feet (10m) from the lift. The frame of the suction assembly is made out of either fiber glass or steel depending upon the model.